How to create a Waste Stream

STEP 1: Name the waste stream product you are creating

1. Click on Setup Menu
2. Click on Waste Stream Setup
3. Enter the Product Name and Product Description
4. Click Save and then Next

STEP 2: Add all relevant materials for the waste stream

1. Click on Add Material
2. Enter the name of the material
3. Enter a description of the material
4. Select a colour for the material listing
5. Click Save
6. Repeat Steps 1 to 5 for every relevant material
7. When all materials are added, click Next

STEP 3: Create your waste stream groups

1. Click Add Group
2. Add the Category Name
3. Add a description for the category
4. Click Save
5. Repeat Steps 1 to 4 for any groups you need
6. When all groups are added, click Next

STEP 4: Create your supply product classes

1. Click on Create Class
2. Select the Category from the drop down
3. Enter the Supply Product’s class name
4. Enter a class description
5. Select the unit of measurement from the drop-down list e.g. Kilogram, lbs, etc.
6. Add the Estimated Weight
7. Click Save
8. Repeat steps 1- 7 again until all your relevant classes have been added
9. Click Next

STEP 5: Add end-of-life product classes

You will have two options:

Option 1: Click on Use Supply Classes as is

Option 2: Create Grouping of Supply Classes

1. Click on Create Grouping of Supply Classes

2. Enter the Group Name and a Group Description
3. Add the estimated end-of-life weight
4. Click on the relevant classes
5. Click on the right arrow
6. Click Save then Next

STEP 6: Set up derived products

1. Click on Create Class
2. Select the Category Group from the dropdown
3. Enter name for the Class
4. Add a description for the class
5. Select the unit of measurement from the drop-down list
6. Enter an estimated weight
7. Click on Add Composition
8. Enter the percentage breakdown of the materials
9. Click Save

STEP 7: When all the Derived Produced Classes are completed, click View Configured Product to finish.